แสดงบทความที่มีป้ายกำกับ digiscope แสดงบทความทั้งหมด
แสดงบทความที่มีป้ายกำกับ digiscope แสดงบทความทั้งหมด

วันจันทร์, เมษายน 04, 2554

ถ่ายดาวเสาร์ ได้จานบิน




วันที่ 4/4/54 เวลา 00.16 สถานที่ กทม.

พอได้ข่าวมาเลยลองถ่ายรูปดู

จากกล้องส่อง14-40X มองเห็นวงแหวนอยู่ลิบๆ

ปรากฏว่าน้องเอ80 เดี้ยง ไม่ยอมทำงาน
น้องเอ640 เบลอจับโฟกัสไม่ได้
น้องลูมิกlx3 สั่นไหว เพราะจับจ่อ และจับจด เลยถ่ายมาเป็นวิดิโอซะ

แต่ไหงรู้สึกว่าเหมือนถ่ายได้จานบินจัง

-------------------------------------------------------------------------------------------------

ข้อคิดจากการถ่ายคืนนี้ สังขารไม่เที่ยง สายตายาวทำให้จับโฟกัสไม่ได้ เฮ้อ



-------------------------------------------------------------------------------------------------------------
จากข่าว

สถาบันวิจัยดาราศาสตร์แห่งชาติ ชวนชมดาวเสาร์เข้าใกล้โลกสุด 3 เม.ย.นี้

วานนี้ (1 เม.ย.) มีรายงานข่าวจากสถาบันวิจัยดาราศาสตร์แห่งชาติ (องค์การมหาชน) หรือ สดร. กระทรวงวิทยาศาสตร์และเทคโนโลยี เปิดเผยว่า ในวันอาทิตย์ที่ 3 เม.ย.นี้ จะเกิดปรากฏการณ์ดาวเสาร์โคจรเข้าใกล้โลกมากที่สุดในรอบปี โดยดาวเสาร์จะโคจรมาอยู่ในตำแหน่งตรงข้ามกับดวงอาทิตย์ ทำให้ดาวเสาร์มีความสว่างมากกว่าปกติเล็กน้อย ทั้งนี้โลกจะโคจรเข้าไปอยู่ระหว่างดาวเสาร์กับดวงอาทิตย์ทุกปี ซึ่งปีนี้ในวันดังกล่าวดาวเสาร์จะมีระยะห่างจากโลกประมาณ 1,288 ล้านกิโลเมตร

สำหรับช่วงเวลาที่เหมาะแก่การสังเกตการณ์ดาวเสาร์ใกล้โลกในวันที่ 3 เม.ย.นี้ คือ ตั้งแต่ดวงอาทิตย์ลับขอบฟ้าทางทิศตะวันตก จนถึงรุ่งเช้าวันใหม่ ผู้สังเกตควรหันหน้าไปทางทิศตะวันออก จะมองเห็นดาวเสาร์ (สีเหลือง) อยู่เหนือดาวสีฟ้าชื่อดาวรวงข้าว (Spica) ในกลุ่มดาวหญิงสาว (Virgo) และอยู่ด้านขวาของดาวสีเหลืองชื่อดวงแก้ว (Arcturus) ในกลุ่มดาวคนเลี้ยงสัตว์ (Bootes) เมื่อส่องดูด้วยกล้องโทรทรรศน์ที่มีกำลังขยาย 20–30 เท่า จะสามารถมองเห็นวงแหวนของเสาร์อย่างชัดเจน ซึ่งขณะนี้ระนาบวงแหวนเอียง 8.6 องศา.

วันจันทร์, ธันวาคม 29, 2551

ทำที่ต่อ Digiscope กับ A640 แบบง่ายๆ

http://digiscopinganswers.blogspot.com/2008/03/digiscoping-with-a640.html
ก่อนอื่นต้องมีกล้องส่องทางไกลก่อนครับ


Digiscoping with A640




Bird Watching magazine editor Kevin Wilmot adopts the handheld digiscoping pose for the Canon PowerShot A640.

I've recently had quite a few calls asking how I go about digiscoping with my Canon PowerShot A640 (which I use with a Kowa TSN-823 scope and 32xW eyepiece)

In the Digiscoping Made Easy DVD I used a PowerShot A95 with a sort of metal tube (a Lensmate) clipped onto a bayonet fitting on the camera. The tube slides neatly into the scope eyepiece, centring the camera and holding it just the right distance from the eyepiece – there was no vignetting at any magnification and it worked beautifully.
I upgraded to the A640 because it has twice the megapixels (10 rather than 5) and the macro is amazing (with an incredible close-focus distance of about 1cm).

The downside is that there isn't a convenient Lensmate-equivalent to connect for digiscoping.

Fear not, though, there is an easy solution – plastic tubing.

Below is the step-by-step guide to how I do my digiscoping. To align the camera with the scope eyepiece, I simply use a plastic ring cut from some plastic piping from a DIY store.


I use one of two rings. The deeper one lifts the camera slightly further away from the eypiece, to stop vignetting at the lowest camera magnifcation. The thinner one is for when the camera is slightly zoomed in. (I worked out the distance by measuring how far back I needed the camera until the vignetting disappeared).

If I am going to be digiscoping all I do is whip out the relevant ring, comme ça...

...then I pop the ring in the scope's eyepiece.

So, it looks like this.

Then all I need to do is insert my camera's lens in the tube.

So, you end up with a set-up looking like this...

...or, if you like, this...

Then you snap away. Here, once more, is Kevin Wilmot impersonating my digiscoping technique beautifully